The Clearance Castle is the best way of challenging and tuning your FDM/FFF 3D Printer! Use these models to calibrate your printer and slicer settings for optimum print accuracy. It's not easy :)

Printing Instructions

These models are challenging, and designed to push your 3D Printers capability to its limits. It’s recommended that you start with the Clearance Card before printing the other, more complex and time consuming models. Model tested with PLA, results using other filaments unknown.

Recommended Slicer Settings:

These settings work well for me, however every 3D Printer is different.

• Layer Height: 0.15mm
• Perimeters: 3
• Infill: 15% Cubic
• Top Solid Layers: 5
• Bottom Solid Layers: 5
• Support Material: No
• Brim: No
• Skirt: Yes (helps to prime the nozzle)

Please note, this is a DIGITAL DOWNLOAD only.