Secret Christmas Bauble

Must have been a problem with my ageing brain. Wish me luck print it on my K1 SE

I had 3 attempted fails with my K1C at .16 on the white part.. so did it with supports.. so *slightly* challenging but *very* worth it.. kiddo is gonna love the suprise! looks great.. thankyou!

I am really impressed and surprised by the good quality this came out of my Prusa Core One. Printed with PETG Das Filament Transparent Rot and Prusament PETG Jungle Green. Here you can find some pictures, I did not clean up anything: https://drive.google.com/drive/folders/1z9luW5GJJ_pxgt_ra3NUqmJl5csGxSEK?usp=sharing
Thanks Angus!

Definitely quite difficult to print. I needed to increase the brim on the top part from 5 mm to 10 mm to get it to stick and slow down my print speeds a good amount for both parts. (75% & 60% on the body and top respectively). It came out pretty well though except for the overhanging edges which were a bit rough as some layers tended to curl up where they were overhanging if they were oriented a certain way to the print fan's airflow. It still works well and slides smoothly though and the triangular bridge at the top also came out nicely. Printed on a Prusa MK3.9S in their Galaxy Black & Galaxy Purple PLA. Used 0.10 mm layer height, 15% cubic infill, 2 perimeters, and brim as instructed.